Three-phase protector/measuring apparatus RDI 705KT 300mA

Presented in casing for Standard DIN 35mm rail (EN 50 022), it is a compact device controlled by a 16 Bit microcomputer, highly stable due to the inclusion of a double state of process watchdog. It withstands permanent and transitory peak surges, as well as low voltage. It can protect multiple, single-phase or three-phase lines, of up to 63A.
It provides diverse measurements and protections:

Differential protection with very high speed cut-off
Protection against peak surge via very high speed physical cut-off
Protection against low voltage
RMS value measurement of V, I ∆ n.

Moreover, constant surveillance of the power input enables an Intelligent Automatic Reset (conditioned). In other words, it resets only on re-establishing normality in the supply. Certain models / versions have Remote Control input and output.

Three-phase protector / measuring apparatus (4 poles)				Tensión+I Diferencial 30mA
Model				RDI
Version				705KT
RMS Voltage Measurement		V1 Line 1	0V ~ 500V
		V2 Line 2
		V3 Line 3
RMS Differential Intensity Measurement			0mA ~ 35mA
RMS Differential Intensity Measurement			0mA ~ 350mA	·
Protection due to Peak Surge (Peak Delay programmable)	RMS Peak	V1 Line 1	265V Delay 500m 385Vpk Delay 0.5, 0.8, and 1.2 mS (same PK delay for Vpk 123)
		V1 Line 2
		V1 Line 3
Protection by Low Voltage	V1 Line 1		180V Delay 600mS	·
	V1 Line 2
	V1 Line 3
Protection due to Differential Intensity IDn 30 mA		RMS Peak	30mA Delay 40m 42mApk Delay 2mS
Protection due to Differential Intensity IDn 300mA		RMS Peak	300mA Delay 40mS 420mApk Delay 2mS	·
Independent Programmable Resets due to I Differential			0 ~ 10 resets	·
Independent Programmable Resets due to Circuit breaker			0 ~ 3 resets	·
Real incremental protection test:			IDn Diferential	·
Real incremental protection test:			Peak voltage
Real incremental protection test:			Low voltage	·
Independent cut-off counters of all the alarms I Differential counter				·
Peak surge counter
Low voltage counter Circuit breaker counter Power failure counter Locking counter Totaliser counter Accumulator counter				·
Security settings (Programming of all the parameters only with user key code)				·
Acoustic and luminous indicator				·

Download this manual
in PDF format.
(requires Acrobat Reader)