Three-phase protector/measuring apparatus DOV 707KT 30mA

Presented in casing for Standard DIN 35mm rail (EN 50 022), it is a compact device controlled by a 16 Bit microcomputer, highly stable due to the inclusion of a double state of process watchdog. It withstands permanent and transitory peak surges, as well as low voltage. It can protect multiple, single-phase or three-phase lines, of up to 63A.
It provides diverse measurements and protections:

Differential protection with very high speed cut-off
Protection against peak surge via very high speed physical cut-off
Protection against low voltage
RMS value measurement of V, I ∆ n.

Moreover, constant surveillance of the power input enables an Intelligent Automatic Reset (conditioned). In other words, it resets only on re-establishing normality in the supply. Certain models / versions have Remote Control input and output.

Three-phase protector / measuring apparatus (4 poles)				Tension + Diferencial I 30mA
Model				DOV
Version				707KT
RMS Voltage Measurement		V1 Line 1	0V ~ 500V	·
		V2 Line 2
		V3 Line 3
RMS Differential Intensity Measurement			0mA ~ 35mA	·
RMS Differential Intensity Measurement			0mA ~ 350mA
Protection due to Peak Surge (Peak Delay programmable)	RMS Peak	V1 Line 1	265V Delay 500m 385Vpk Delay 0.5, 0.8, and 1.2 mS (same PK delay for Vpk 123)	·
		V1 Line 2
		V1 Line 3
Protection by Low Voltage	V1 Line 1		180V Delay 600mS	·
	V1 Line 2
	V1 Line 3
Protection due to Differential Intensity IDn 30 mA		RMS Peak	30mA Delay 40m 42mApk Delay 2mS	·
Protection due to Differential Intensity IDn 300mA		RMS Peak	300mA Delay 40mS 420mApk Delay 2mS
Independent Programmable Resets due to I Differential			0 ~ 10 resets	·
Independent Programmable Resets due to Circuit breaker			0 ~ 3 resets	·
Real incremental protection test:			IDn Diferential	·
Real incremental protection test:			Peak voltage	·
Real incremental protection test:			Low voltage	·
Independent cut-off counters of all the alarms I Differential counter				·
Peak surge counter				·
Low voltage counter Circuit breaker counter Power failure counter Locking counter Totaliser counter Accumulator counter				·
Security settings (Programming of all the parameters only with user key code)				·
Acoustic and luminous indicator				·

Download this manual
in PDF format.
(requires Acrobat Reader)